BenQ VB3233 Quick Start Manual page 44

V32B_V37B_EN.book Page 40 Wednesday, January 23, 2008 10:55 AM
Naming a program
You can give each TV program a 6-character name using this function. Once
set, the name displays on the upper right corner of the screen below the
program number when the program is selected.
1. In the TV menu, press
The following menu will display:
2. Press to select
you wish to name. You can also press the Program selection numeric
buttons on the remote control to select the program directly. Two digit
entry is required. For example, press "0", "2" to select program 2.
3. Press to highlight
character you want to edit,
4. Repeat step 3 to edit other characters.
5. Press OK to store the name.
MENU
6. Press
Swapping programs
You can use this function to quickly swap two programs.
1. In the TV menu, press
2. Press to select
you wish to relocate to a different position. You can also press the Program
selection numeric buttons on the remote control to select the program
directly. Two digit entry is required. For example, press "0", "2" to select
program 2.
3. Press to highlight
numeric buttons on the remote control to select the new location for the
program. Two digit entry is required. For example, press "0", "5" to select
program location 5.
4. Press OK and the current program is changed to the new location.
MENU
5. Press
40 OSD (On-Screen Display) menu
or to select
Program Edit
Select PR
Edit Name
PR Swap
PR Lock
PR Delete
Select a Program Number
by Using Keys PR+, PR- or 0 to 9
Select PR , and then press
Edit Name , and then press
or to change it to your desired character.
to close the menu.
or to select
Select PR , and then press
PR Swap
, and then press the Program selection
to close the menu.
Program Edit and then press
12
------
--
Off
12
+ or - to select the program
+ or - to highlight the
Program Edit and then press
+ or - to select the program
OK .
OK .