Connecting The S-Video Input; Connecting The Component Video Input - BenQ VB3233 Quick Start Manual

V32B_V37B_EN.book Page 26 Wednesday, January 23, 2008 10:55 AM

Connecting the S-Video input

1. Connect the S-Video output of your
output equipment (like a DVD player) to
AV2 S-VIDEO
the TV's
S-Video cable (not provided). Pay
attention to the alignment of the plugs on
the S-Video cable when inserting so as not
to damage any pins.
2. Connect the S-Video audio output of the
output equipment to the TV's
L (white)/ R (red) input terminals using a
suitable RCA type audio cable.
To view video image from this input, press
INPUT and select
You should not connect both a composite
Video and an S-Video from the same
device; just one or the other. If you have
the choice, use the S-Video instead of
composite Video as an S-video signal
provides a higher quality signal to that of
composite Video.

Connecting the Component Video input

1. Connect the Component Video output of
your output equipment (like a TV game
console) to the TV's
CR / PR terminals using a Component
Video cable (not provided). A Component
Video cable consists of three plugs: green
(Y), blue (C /P
B
2. Connect the Component Video audio
output of your output equipment to the
TV's AV1 L (white)/
terminals on the TV using a suitable RCA
type audio cable.
To view video image from this input, press
INPUT and select
Of the analog video signal types,
Component Video offers the best quality.
Ensure that the colors of the plugs and
terminals match when making connection.
For best display results, set the output
resolution of the Component Video source
device to 720p.
See "Supported Component Video input
signal resolutions" on page 48
supported resolutions.
26 Connecting audio and video inputs
terminal using an
AV2 AUDIO
AV2-S.
AV1 Y , CB / PB and
) and red (C /P ).
B R R
R (red) input
AV1 .
for
S-Video
Audio cable
cable
player
Component
Audio
Video cable
cable
TV game
console
DVD