Select And Prepare The Installation Location - BenQ VB3233 Quick Start Manual

V32B_V37B_EN.book Page 3 Wednesday, January 23, 2008 10:55 AM
3.

Select and prepare the installation location

In order to prevent potential dangers and prolong the service life of the TV,
please observe the following points when installing, operating and cleaning
the TV.
Do NOT place the TV on an
uneven, sloping or unstable
surface where it may fall and cause
damage to itself or others. Have a
qualified technician secure the TV
in case there is an earthquake.
Do NOT place the TV near water,
like a spa or pool, or in a position
which will allow the splashing or
spraying of water onto the TV, like
in front of an open window where
rain water may enter.
Do NOT place the TV near or
above sources of heat, such as
radiators, heaters, fuel stoves and
other heat-generating items
(including audio amplifiers).
Otherwise heat may cause
damages to the outer casing as well
as the components inside.
If wall mounting, allow
appropriate space on top for
attaching the TV to the wall
bracket.
If wall mounting, disconnect all
cables and have a suitable qualified
and experienced technician mount
it safely. Use only a recommended
TV wall bracket for this model TV
and ensure that the mounting
brackets (optional accessory) are
securely screw fixed to the wall
structure, and not just the wall
render, lining or cladding. Ensure
the brackets are level horizontally.
Do not glue the brackets to the
wall.
Do NOT place the TV in an
enclosed place without allowing
for ventilation.
Observe all warnings and cautions
as labelled on the TV.
Do NOT cover or block the vents
and openings while the TV is
switched on, as the heat may
accumulate inside the TV and
result in danger.
Do NOT place the TV in direct
sun or where direct sun or spot
lighting will shine onto the TV, as
the heat may damage the TV and
the bright light will make viewing
the TV more difficult than
necessary.
If recessed into a wall opening, you
must leave appropriate free space
both top and bottom for
mounting and removing the TV.
This TV has no power switch.
When installing the TV,
incorporate a readily accessible
disconnect device in the fixed
wiring, or connect the power cord
to socket-outlet which must be
provided near the TV and easily
accessible. If a fault should occur
during operation of the unit,
operate the disconnect device to
switch the power supply off, or
disconnect the power cord.
Section 1: Quick Start Guide 3