BENQ Corporation
Using Remote Control to Adjusting the Utility Settings
You can set the utilities on the menu screen or by the remote control directly
SLEEP TIMER & BACKLIGHT
Backlight
Info
Operation
32
Directly setting the SLEEP TIMER
You can directly press "SLEEP" button on Remote Control as
1.
illustrated to set the sleep timer (in minutes) and the screen
display information as follows:
2. Press "SLEEP " again to select different setting value.
3. The time can be set in increments of 30 minutes and in the
range between 0 and 150 minutes.
When the set is going into sleep mode, the screen display
information appears as follows:
Adjusting the Backlight
To adjust the panel backlight, you also can directly press the
"BACKLIGHT" button on the Remote Control
Display the Signal Information
You can press the "INFO" button on the Remote Control to display
the signal information.