Adjusting The Contrast; Adjusting The Brightness; Setting Up The User Picture Mode - BenQ VK Series User Manual

Adjusts the auto contrast
ACE (Auto
enhancement function that
Contrast
optimizes the image contrast ratio
Enhancement)
for dark scenes.
Adjusts the image noise reduction
Noise
function that helps to remove
Reduction
noise in images.
The ACE and Noise Reduction functions are only available when the input source
resolution is 480i, 480p, 576i or 576p.

Adjusting the contrast

1. Set the contrast to the highest level.
2. Gradually decrease the contrast level until you reach the point where the
details in the bright areas of the image can be seen clearly. Do not further
decrease the contrast level to avoid losing the saturation of colors.

Adjusting the brightness

1. Set the brightness to the lowest level.
2. Gradually increase the brightness level until you reach the point where the
details in the dark areas of the image can be seen clearly. Do not further
increase the brightness level to avoid the black areas from looking grayish.

Setting up the User Picture Mode

You can adjust the settings in the
Picture Mode.
1. Press
2. Press
menu.
3. Press
.
User
4. Press
etc., and then press
5. Press
36 OSD (On-Screen Display) menu
to display the OSD menu on-screen.
MENU
or to select
Picture
or to select
Picture Mode
or to select
Backlight
or to adjust the settings to your satisfaction.
to save the settings and close the OSD menu.
MENU
Press
change selection.
menu and save them as your
Picture
, and then press to enter the
, and then press
, ,
Brightness Contrast
• Low
• Medium
or to
• High
• Off
User
Picture
or to select
, ...,
Sharpness