Table of Contents
Advertisement
Using the remote control
Power on, off and standby
Turning on the TV
After plugging the TV's power cable into a wall outlet, the TV will enter standby mode
automatically. The power indicator will light up orange. Press
control. The TV will turn on and the power indicator will change to blue.
Putting the display to standby
Power on the remote control again, and the TV will return to standby mode. The
Press
power indicator will turn orange.
The display still consumes a very small amount of power (about 0.5W) in standby mode.
Switching inputs
1. Turn on all connected equipment or devices before
selecting an input.
INPUT on the remote control to view the current
2. Press
selected input. Press
to select your desired input then press OK button to
confirm. You can also press
switch between different input sources.
• These options will only appear when corresponding signals
are connected to the display.
• Be aware that HDMI input must be HDCP-compliant to be
displayed.
When switching to the HDMI inputs, the display needs
several seconds to detect the HDCP information from the
signal source and no image will be displayed during this
period. This is not a malfunction.
Adjusting sound setting
Adjusting volume
• Press VOL
increases in length as volume rises.
• Press VOL
decreases in length as volume falls.
Mute setting
MUTE on the remote control to turn off the sound temporarily.
Press
Press
MUTE once more, or press VOL
Selecting a TV sound mode
Press TV AUDIO on the remote control to toggle TV sound among available modes. (The
modes available will depend on the TV or Video sound system being received).
20
Using the remote control
INPUT button, use ▲▼ button
INPUT continuously to
on the remote control to increase volume. The volume indicator
on the remote control to decrease volume. The volume indicator
Power on the remote
to restore the sound level.
Advertisement
Table of Contents
