Remote Control - BenQ Q150 User Manual

REMOTE CONTROL

There are 37 keys on the remote control:
9.?/?/?/?(Cursor control) and ENTER:
??: Use these Up/Down buttons to select items or settings and to adjust settings.
??: Press these Right/Left buttons to adjust the OSD menu setting. And Press ?button as a " Select";
"Execute" or "Enter" sub menu setting.
Press this "ENTER" button to "Execute" the selection or "Enter" the sub menu you desire.
10.CH+and CH -:
Press these two buttons to change the TV channel.
11.VOL+ and VOL-
Press the Volume Up "+" or Down "-" button to increase or decrease the sound volume level.
12.PRESET:
Press this button to select between 5 user situation modes.
13.MUTE: Press this button to silence the sound system. Press again to activate it.
14.CH+/-:
Press this button to add the current TV channel. Press again to erase the current TV channel.
15.MTS:
Press this button to choose different audio system. (Different TV systems have different selections.)
16.TV/CATV:
Press this button to choose the mode for TV and Cable TV systems.
17.SLEEP:
Press this button to set up the LCD TV auto turn off time.
18.FREEZE:
Press this button to freeze the screen (the video source still runs). Press again to exit this function.
19.ASPECT:
Press the button to adjust the image display screen format.
20.BACK LIGHT:
Press this button to adjust the LCD backlight brightness.
1.POWER:
Press this button to turn on the TV set. Press
again to enter the standby mode.
2.INFO:
Press this button to turn on the TV channel
message and any signal message (Including
Video and PC). Press again to turn off.
3.Channel Select:
Press these buttons to select the TV channel
you want to enter.
4.CHRTN:
Press this button to jump between two channels.
5.FAVOR
Press this button to jump to user's favorite
channel.
6.MENU:
Press this button to display the OSD menu for
adjusting the image, sound and functions and
choose the menu content from right or left page
sequence.
7.INPUT:
Press this button to open the input source
selection menu or directly choose the input
source.
8.EXIT:
Press this button to exit the controls of OSD
menu directly.
User's manual
Operation 23