Table of Contents
Advertisement
Getting to know the remote control
For China
1.
(Power/standby)
Press this button to power the TV on (the Power/
status indicator lights up green) or put it to the
standby mode (the Power/status indicator changes to
red).
信号选择 (Input)
2.
Press this button to select an input source.
Note:
• The video pictures will only appear when
corresponding signals are connected to the TV.
• Be aware that the HDMI input signal must be HDCP-
compliant to be displayed properly. When switching
to the HDMI inputs. The TV needs approximately 8 to
10 seconds to detect the HDCP information from the
signal source and no image will be displayed during
this period. This is not a malfunction.
• When displaying PC video, remember to switch the
PC video output setting from monitor display to
external device. For more information, refer to the
documentations of your PC.
电视 (TV)
3.
Press this button to switch to the TV input directly
and view TV channels.
4. 睡眠定时 (Sleep Timer)
Press this button to set the automatic shut-off timer.
For example, if you set the sleep timer to 30 minutes,
the TV will enter standby mode after 30 minutes of
time. Before the expiration of the set time, a message
will display on-screen as a reminder. You can press
any button on the remote control to reset the sleep
timer and the TV will remain on. At the expiration of
this time, the TV will enter the standby mode
automatically. To turn off this function, set the time
to
.
Off
5. 画面冻结 (Freeze)
Press this button to freeze the image on the screen.
Press any button on the remote control or TV to
resume viewing in real time.
Do not leave the screen displaying a static image
or use the 4:3 aspect ratio for an extended period
of time (days) because you may temporarily or
permanently damage the screen resulting in image
traces which could remain visible long after the
original image has been removed.
Getting to know the remote control
17
Advertisement
Table of Contents
