Remote Control - BenQ DV2680 User Manual

Remote Control

8. SLEEP
Press this button to set the automatic shut-off timer.
9. PICTURE
Press this button to select from among 4 user situation modes.
10. PIP AUDIO
Press this button while in PIP or PBP mode to select audio from the main/sub picture or the left/
right picture respectively.
11. CH +/-
Press this button to add current TV channel. Press again to erase current TV channel.
12. "i" key
Press this button to let the television automatically adjust frequency, phase and image position
in PC or HDTV modes, or search for signal source and properly display the video format in the
video mode.
1. POWER
Press this button to power on the television. Press
again to put the set into standby mode.
2. INFO
Press this button to display the TV channel message
and any signal message (including video or
computer signals). Press the EXIT button to turn it
off.
3. ASPECT
Press this button to adjust screen image display
settings.
4. TV/CATV
Press this button to select television or cable system
mode.
5. BACKLIGHT
Press this button to select the desired backlight
level.
6. PIP/PBP
Press this button to simultaneously view signals
from two different sources on the screen.You may
choose picture-in-picture (PIP) mode or picture-
by-picture (PBP) mode.
7. FREEZE
Press this button to freeze the screen (the signal will
continue to be broadcast). Press the button again to
release.
19
Remote Control