Table of Contents
Advertisement
6 Settings
6
Settings
6.1
List of parameters
Parameter
Description
Hybrid operating mode
(1)
(1) Only available if
= 0
Tab.13 Energy cost parameter
Parameter
Description
Tariff per kWh of electricity
(1)
For a standard electricity tariff, input the
parameter
Tariff per kWh of electricity (off-peak hours).
.
(1)
For a Peak Hours / Off-peak Hours electricity
tariff, input the parameters
Hours tariff and
Fossil energy tariff for the hydraulic back-up
.
(1)
Gas boiler: Tariff per m
Oil boiler: Tariff per litre of oil. Example: €/litre
(1) Only available if
= 0
16
AWHP-2 MIV-3 V220
6.1.1 Choosing the hybrid operating mode
Adjustment range
0 to 2
0 = Deactivated
1 = Optimisation of primary energy
consumption
2 = Optimisation according to energy cost
Note
It is imperative that you input the energy cost parameters
and
to energy cost
6.1.2 Energy cost parameters
Caution
The currency for parameters
same. Example:
Note
Parameters
.
for the Peak
for the Off-peak Hours tariff.
3
of gas. Example: €/m
to use the hybrid operating mode optimised according
,
in euro per kWh and
,
and
are available only if
Adjustment
Increment
range
0.01 to 2.00
0.01
0.01 to 2.00
0.01
0.01 to 2.50
0.01
3
Increment
Factory
setting
1
0
,
and
must be the
in euro per litre.
= 2.
Factory setting
0.13
0.09
0.9
7612035 - v02 - 12062014
Advertisement
Table of Contents
