Table of Contents
Advertisement
6 Settings
Fig.13
Modifying the value
K
M
SERVICE
E
D
"
"
.
"
A
B
Fig.14
Navigating in the menu
K
M
SERVICE
E
D
"
"
.
"
A
B
Fig.15
Accessing the forcing function
K
M
SERVICE
E
D
"
"
.
"
A
B
18
AWHP-2 MIV-3 V220
!
C
D
!
C
D
!
C
D
6.2.3 Changing the operating mode
1. Press keys C (
) and (D) simultaneously.
The symbol
flashes.
2. Confirm by pressing the D (
3. Use the B ( ) or C key (
Operating mode
Heating and domestic hot
water
Heating
Domestic Hot Water
Cooling and domestic hot
water
Cooling
Shut-down/Frost Protection
Swimming pool
Swimming pool and domestic
hot water
4. Press the D key (
6.2.4 Configuring the hybrid operating mode
1. Go to the Installer
See
Using the control panel, page 14.
2. Use the
and
keys to switch from one parameter to another.
See
List of parameters, page 16.
3. Use the
and
keys to modify the parameter value.
4. Press the
key to confirm the setting.
Note
To modify another parameter, repeat the procedure from step 3.
5. Press the
key to exit the menu.
6.2.5 Forcing use of the back-up
Note
It is impossible to force the back-up when the shut-down/frost
protection mode is selected.
It is possible to force use of the back-up to complement the heat pump. To
force use of the back-up, perform the following operations:
1. Press the A and D keys simultaneously. Hold the keys down.
) key.
) to modify the value.
Value
1
2
3
4
5
6
7
8
) to confirm and exit the menu.
menu.
7612035 - v02 - 12062014
Screen display
+
+
Advertisement
Table of Contents
