Enabling And Disabling Parksense - Jeep Cherokee Owner's Manual

If the Uconnect® System is equipped, chime volume
settings will not be accessible from the EVIC.
The chime volume settings include LOW, MEDIUM, and
HIGH. The factory default volume setting is MEDIUM.
ParkSense® will retain its last known configuration state
through ignition cycles.
Enabling And Disabling ParkSense®
ParkSense® can be enabled and disabled with the
ParkSense® switch, located on the switch panel below
the Uconnect® display.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 251
ParkSense® Switch
When the ParkSense® switch is pressed to disable the
system, the instrument cluster will display the
"PARKSENSE OFF" message for approximately five sec-
onds. Refer to "Electronic Vehicle Information Center
(EVIC)" in "Understanding Your Instrument Panel" for
further information. When the shift lever is moved to
3