Jeep Cherokee Owner's Manual page 154

152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Front Heated Seats — If Equipped
The front heated seats control buttons are located within
the climate or controls screen of the touchscreen.
• Press the heated seat button
setting On.
• Press the heated seat button
the Low setting On.
• Press the heated seat button
the heating elements Off.
When the HI-level setting is selected, the heater will
provide a boosted heat level during the first four minutes
of operation. Then, the heat output will drop to the
normal HI-level. If the HI-level setting is selected, the
system will automatically switch to LO-level after a
maximum of 60 minutes of continuous operation. At that
once to turn the High
a second time to turn
a third time to turn
time, the display will change from HI to LO, indicating
the change. The LO-level setting will turn OFF automati-
cally after a maximum of 45 minutes.
NOTE: The engine must be running for the heated seats
to operate.
Vehicles Equipped With Remote Start
On models that are equipped with remote start, the
heated seats can be programed to come on during a
remote start.
This feature can be programmed through the Uconnect®
system. Refer to "Uconnect® Settings" in "Understand-
ing Your Instrument Panel" for further information.