Acc Operation At Stop; Adaptive Cruise Control (Acc) Menu - Jeep Cherokee Owner's Manual

Hide thumbs Also See for Cherokee:

Table of Contents

ACC Operation At Stop

If the ACC system brings your vehicle to a standstill

while following a target vehicle, if the target vehicle starts

moving within two seconds of your vehicle coming to a

standstill, your vehicle will resume motion without the

need for any driver action.

If the target vehicle does not start moving within two

seconds of your vehicle coming to a standstill, the driver

will either have to press the RES (resume) button, or

apply the accelerator pedal to reengage the ACC to the

existing Set Speed.

NOTE: After the ACC system holds your vehicle at a

standstill for approximately 3 consecutive minutes, the

parking brake will be activated, and the ACC system will

be cancelled.

While ACC is holding your vehicle at a standstill, if the

driver seatbelt is unbuckled or the driver door is opened,

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 201

the parking brake will be activated, and the ACC system

will be cancelled.

When the ACC system is resumed, the driver must

ensure that there are no pedestrians, vehicles or

objects in the path of the vehicle. Failure to follow

these warnings can result in a collision and death or

serious personal injury.

The EVIC displays the current ACC system settings. The

EVIC is located in the center of the instrument cluster.

The information it displays depends on ACC system

Table of Contents