Jeep Cherokee Owner's Manual page 375

Refer to "EVIC settings" or "Uconnect® Settings" in
"Understanding Your Instrument Panel" for further in-
formation.
• ParkSense® Rear Park Assist Chime Volume — If
Equipped
Rear Park Assist chime volume settings can be selected
from the EVIC or Uconnect® System (if equipped). The
chime volume settings include "LOW," "MEDIUM," and
"HIGH." The factory default volume setting is MEDIUM.
Refer to "EVIC settings" or "Uconnect® Settings" in
"Understanding Your Instrument Panel" for further in-
formation.
• ParkSense® Active Park Assist Braking — If
Equipped
When this feature is selected, the park assist system will
detect objects located behind the vehicle and utilize
autonomous braking to stop the vehicle.
UNDERSTANDING YOUR INSTRUMENT PANEL 373
Refer to "ParkSense® Rear Park Assist" in "Understand-
ing The Features Of Your Vehicle" for system function
and operating information.
• Tilt Mirrors In Reverse — If Equipped
When this feature is selected, the outside sideview mir-
rors will tilt downward when the ignition is in the RUN
position and the transmission shift lever is in the RE-
VERSE position. The mirrors will move back to their
previous position when the transmission is shifted out of
REVERSE. To make your selection, touch the "Tilt Mir-
rors In Reverse" soft-key, until a check-mark appears next
to setting, showing that setting has been selected. Touch
the back arrow soft-key to return to the previous menu.
• Blind Spot Alert — If Equipped
When this feature is selected, the Blind Spot Alert feature
can be set to Off, Lights or Lights and Chime. The Blind
Spot Alert feature can be activated in Lights mode. When
this mode is selected, the Blind Spot Monitor (BSM)
4