Jeep Cherokee Owner's Manual page 351

• Selec Speed Control Indicator — If Equipped
The symbol illuminates and is active only
in 4WD Low range when either the HDC
switch on the instrument panel is selected
or ROCK mode for Selec-Terrain is selected.
If the T-case is not in 4WD Low range, the following
message is displayed "Selec-Speed Unavailable".
• Electronic Speed Control ON
This light will turn on when the electronic
speed control is ON. For further informa-
tion, refer to "Electronic Speed Control" in
"Understanding The Features Of Your
Vehicle".
• Electronic Speed Control SET
This light will turn on when the electronic
speed control is SET. For further informa-
tion, refer to "Electronic Speed Control" in
"Understanding The Features Of Your
Vehicle".
UNDERSTANDING YOUR INSTRUMENT PANEL 349
• Adaptive Cruise Control (ACC) Distance Setting
Display
This will display the distance setting for the
ACC system. For further information, refer
to "Adaptive Cruise Control (ACC)" in
"Understanding The Features Of Your
Vehicle".
10. Shift Lever Status (PRNDL)
The shift lever status "P,R,N,D,L,9,8,7,6,5,4,3,2,1" are dis-
played indicating the shift lever position. Refer to "Start-
ing And Operating".
11. Instructional Area
This area will display text to the visual warnings (i.e.,
"Push Brake To Start").
4