Troubleshooting The 4601 Ip Telephone - Avaya 4600 Series Installation Manual

Troubleshooting Guidelines
Table 3: Possible Error and Status Messages During Installation of 4600 Series IP
Telephones (continued)
Message
Undefined Error
Resource Error
Wrong Set Type

Troubleshooting the 4601 IP Telephone

Because the 4601 IP Telephone lacks a display, it uses its LEDs to indicate status and error
situations. In Table
conditions described in
and off to indicate status or an error condition. LED indication is described in the second column
of this table. In addition, not all conditions result in unique LED indications.
Table 4: Possible Error and Status Messages During Installation of the 4601 IP
Telephone
Message
Extension
Error
94 4600 Series IP Telephone Installation Guide
Cause/Resolution
CAUSE: The PBX has rejected registration for an unspecified reason.
RESOLUTION: Consult your Avaya Media Server administration and
troubleshooting documentation.
CAUSE: The PBX rejects the registration request.
RESOLUTION: Verify administration to ensure the telephone's proper
IP Address, extension, and password are being used.
CAUSE: The PBX does not recognize the set type.
RESOLUTION: Ensure the PBX is properly administered to expect the
appropriate telephone for the IP Address and extension.
4, the Messages shown in the first column correspond to the equivalent
Table 3. Rather than displaying messages, the 4601 turns its LEDs on
Visual Indication/Cause/Resolution
VISUAL INDICATION: Message Waiting indicators at top of telephone
and the left middle of the faceplate display a broken flutter for a total of 5
cycles (with one cycle being alternating 50 milliseconds on, 50
milliseconds off for 500 milliseconds followed by 500 milliseconds off).
CAUSE: The PBX does not recognize the extension entered or cannot
find a valid gatekeeper.
RESOLUTION: Confirm the extension is correct and is correctly
administered on the switch. Then try registration again, taking particular
care to enter the extension accurately.
5 of 5
1 of 3