Avaya 4600 Series Installation Manual page 89

Table 2: Viewing Parameter Values (continued)
Name System Value
Protocol cccccccc
filename.ext
ccccccc Ethernet
filename.ext
cccccccccc
cccccccccc
Build cccccccccc
DHCPSTD n
Audio nnn
Environment
Handset n
sidetone
Headset n
sidetone
The View Administrative Option
Format
Up to 8 ASCII characters, depending on the
system-specific signaling protocol (H.323, SIP,
etc.) currently being used.
Up to 16 ASCII characters: name of the
application code file ("big app") currently stored
in the telephone.
Ethernet connection. From 2 to 7 ASCII
characters, either "100Mbps", "10 Mbps", or
"No."
Up to 16 ASCII characters. Name of the boot
code file ("little app") currently stored in the
telephone.
Up to 10 ASCII characters. DSP code version.
Up to 10 ASCII characters. DSP hardware
version, displayed only if a DSP hardware
version identifier is available.
Build identifier. Up to 1- ASCII characters.
DHCP standard flag. If "1" the telephone strictly
follows the DHCP standard by giving up IP
Addresses when the DHCP lease expires. If "0"
the telephone uses the IP Address until it
detects a reset or a conflict.
Audio environment selection index (0 to 107);
the AUDIOENV system value.
The AUDIOSTHS system value where 0=No
change, 1=6dB below nominal, 2=no sidetone -
infinite loss.
The AUDIOSTHD system value where 0=No
change, 1=6dB below nominal, 2=no sidetone -
infinite loss.
3 of 3
Issue 7 July 2008 89