MGE UPS Systems GALAXY 6000 Specifications Manual page 19

TM
MGE Galaxy
Parallel UPS, three-phase, 250 to 3000 kVA*
* Power rating for an N+1 redundant configuration
Inverter
Three-phase output voltage with neutral
adjustable
Steady-state conditions
Voltage transients
Output voltage distortion at Pn
Output frequency
Variation in output frequency
adjustable
Frequency synchronisation with an external
source
Overload capacity
Current limiting
Crest factor
Static bypass
Static bypass
Short-circuit withstand of static bypass
Maintenance bypass
Efficiency
Normal mode
User interface
Graphic display 15 languages
personalisation menu
display
event log
Controls
Status indications with mimic panel
APC By Schneider Electric
TM
6000 : Specification guide
Volts
± 3 %
± 1%
± 3% (load from 0 to 100 or 100 to 0 %)
THDU ph-N < 4% for linear loads
THDU ph-N < 4% for non-linear loads
Hz
± 0.5 Hz
± 0.25 Hz to 2 Hz
± 8 % of rated frequency
125% In for 10 minutes
165% In for 1 minute
233% In for 150 milliseconds
up to 3:1
depending on power
> 95% at Pn, > 92 % at Pn/2
selection of operating language
with password
measurements, status, events, graphs
Time-stamping 2000 events
ON, OFF, EPO terminal block
Audio alarm, LEDs
Edition - 03/2009
yes no
yes no
yes no
yes no
yes no
yes no
yes no
yes no
yes non
yes no
yes no
yes no
yes no
yes no
yes no
yes no
yes no
yes no
yes no
yes no
yes no
yes no
yes no
yes no
Spec. E - 19