Resetting Alarm [Ack] - JRC JMA-3910-4 Instruction Manual

3.3
To set the alarm sound
Specify whether to output alarm sound in case of an alarm or not.
1. Press the
Procedures
2. Press the
3. Press the
4. Press the
Exit 5. Press the
To set the alarm detection level
Set the signal level for outputting an alarm.
1. Press the
Procedures
2. Press the
3. Press the
4. Press the
5. Press the
Exit
3.3.14

Resetting Alarm [ACK]

This function is used to stop alarm sound when an alarm sound occurs.
To stop alarm sound
Press the
Procedures
ALARM
key to open RADAR ALARM MENU.
5
key to select "AUDIBLE WARNING".
5
key to select RADAR ALARM "OFF" or "ON".
ENT
key to confirm the setting.
ALARM
key.
ALARM
key to open RADAR ALARM MENU.
4
key to select "RADAR SENSITIVITY LEVEL".
4
key to select the level between "1" and "4".
ENT
key to confirm the setting.
ALARM
key.
ACK
switch to stop alarm sound.
3 – 29