Connecting Navigation Equipment - JRC JMA-3910-4 Instruction Manual

7.5

7.5.3.11 Connecting Navigation Equipment

This function is used to connect and set the GPS.
1. Press the
Procedures
2. Press the
3. Press the
4. Press the
5. Press the
6. Press the
Exit
When "183" is selected, the talker ID is displayed on the bottom of the screen in the
plot mode after data is received from the navigation system. Ask the navigation system
manufacturer for the ID.
INIT SETTING #3
INIT SETTING #3
Press an item number key.
0. PREVIOUS MENU
1. SHIFT COAST LINE #1
(RADAR PICTURE)
2. SHIFT COAST LINE #2
3. LAT ／ LON CORRECTION
4. CHART CENTER POSITION
5. DATA INPUT FORMAT
6. DATA ／ TIME
7. SHIP'S TYPE
8.
9. NEXT MENU
To close this menu, Press (SUB MENU) key.
SUB
key to open the SUB MENU.
MENU
9
key three times to open the INIT SETTING #3 menu.
5
key to select "DATA INPUT FORMAT".
5
key several times to select either "183", "JRC" or "180".
ENT
key to confirm the setting.
SUB
key.
MENU
SETTING DELETE
N 0.000'
E 0.000'
N 0.000'
E 0.000'
N 35˚00.000'
E 135˚00.000'
183 JRC
OFF UTC
FISHING BOAT
7 – 37
180
LOCAL
MERCHANT