Stopping Track Storing - JRC JMA-3910-4 Instruction Manual

3.6

3.6.3 Stopping Track Storing

This operation is stopped track storing. After stopping storing the track, the track remains displayed although
is cleared by enhancing or reducing the screen.
1. Press the
Procedures
2. Press the
(or press the
3. Press the
(or press the
MEMORY".)
4. Press the
(or press the
5. Press the
Exit 6. Press the
(or press the
MODE
key to select R+P (radar + plotter) or plotter mode.
OWN
key to open the OWN TRACK menu.
TRACK
SUB
4
, keys to open the RADAR #4 menu.)
MENU
3
key to select "OWN TRACK MEMORY".
3
key on the RADAR #4 menu to select "OWN TRACK
3
key to select "OFF" or "ON".
3
key on the RADAR #4 menu.)
ENT
key to confirm the setting.
OWN
key.
TRACK
SUB
key to close the RADAR #4 menu.)
MENU
3 – 79