2- The Terminal; 3- The Terminal Connections; 4- The Base Connections - Ingenico ELITE 790 User Manual

ELITE 790 Terminal
2- The Terminal
The terminal case contains the following elements:
• The portable terminal and base.
• A cable that connects the terminal to a telephone line.
• A power pack that connects the terminal to a 115 or 230 volt power point (depending
on the country)

3- The Terminal Connections

There are two connectors on the back of the terminal. (See page 4)
The blue jack is for portable hands free kit. The black connector is suitable for a peripheral
device like a barcode scanner, for which a specific software application is required.

4- The Base Connections

0 Telephone Connection
The compact telephone cable connection
supplied with the Elite terminal must be
connected to the port marked with the
symbol . The telephone connection
(RJ11) must be connected to the telephone
socket in the wall.
0 Electrical Connection
The small jack connection to the power pack
is plugged into the port marked with the
symbol . The twin pronged electrical
plug is connected to an electrical point (115
or 220 volts, depending on the country).
Only use the power supply pack
provided with the terminal.
0 Connection to an external peripheral device
Some peripheral devices such as a cheque
readers can also be connected.
The ELITE 790 terminal must be powered
off before connecting the cable on the base
to the RS232 port.
6
Telephone line
Power Supply
Serial port