Clearances To Combustibles - HearthStone Waitsfield DX 8770 Owner's Manual

Hearthstone Quality Home Heating Products, Inc
and other components aside until called for during
the installation.
Dismounting from Pallet
With the accessory boxes removed and set aside,
remove the four lag screws that fasten the unit to the
pallet. Take care not to mar or chip the stove's finish.
Have someone help lift the stove off the pallet,
taking care to avoid damaging components mounted
under the stove.
INSTALLER: Leave this manual with the appliance.
INSTALLATEUR : Laissez cette notice avec
l'appareil.
Retain
CONSUMER:
reference.
CONSOMMATEUR : Conservez cette notice
pour consultation ultérieure
Firebox Access
1. Remove top of the stove (lift off). Set carefully
aside on a soft surface (Figure 1).
2. Release the front panel by lifting up and off of
the stove body and set aside (Figure 2).
3. Remove glass and frame by holding to the stove
with one hand while pulling glass retention
spring clips forward and lifting slightly clear of
the stove glass frame one at a time (Figure 3).
4. Gently release pressure on the glass/frame and
allow to tilt outward. Gently grasp and lift up and
off of the stove (Figure 4).
While glass and retention frame are removed from
the stove, perform log set installation as descirbed
on pages 25-27. Reverse procedure outlined above
to reinstall.

Clearances to Combustibles

Note: Ensure clearances are in accordance with
local installation codes and the requirements of
the gas supplier. Dégagement conforme aux
codes d'installation locaux et aux exigences du
foumisseunde gaz.
Due to high surface temperatures, locate the unit
out of traffic areas and away from furniture and
draperies. Do not place clothing and other
flammable material on or near the heater. When
positioning the unit always maintain adequate
this manual for future
WAITSFIELD Model 8770
10