Camera Control Feature Descriptions - Dalsa Piranha XL PX-HM-16K12B-00-R User Manual

Camera Control Feature Descriptions

Display Name Feature
Device Scan DeviceScanType
Type
Standard
Internal Line AcquisitionLineRate
Rate
Measured Line measureLineRate
Rate
Refresh refreshMeasureLineRate
Measured Line
Rate
Exposure Time ExposureMode
Source
Timed Timed
Exposure Time ExposureTime
Measured measureExposureTime
Exposure Time
Refreshed refreshMeasureExposureTime
measured
exposure time
Direction Source sensorScanDirectionSource
Internal
External
Internal Direction sensorScanDirection
Forward
Reverse
Row Selector TDIStagesSelector
4 Rows
8 Rows
12 Rows
Extended Gain gainExtended
Range
Gain Gain
The Piranha XL Camera
Description
Used to set the camera scanning mode. Only
standard TDI mode is available.
Specifies the camera internal line rate, in Hz when
Trigger mode set to internal.
Note that any user entered value is automatically
adjusted to a valid camera value.
Specifies the line rate provided to the camera by
either internal or external source (RO)
Press to show the current line rate provided to the
camera by either internal or external sources
Sets the operation mode for the camera's exposure
(or shutter). (RO)
The exposure duration time is set using the Exposure
Time feature and the exposure starts with a LineStart
event.
Sets the exposure time (in microseconds) when the
Exposure Mode feature is set to Timed.
Specifies the exposure time provided to the camera
by either internal or external source (RO)
Press to display the current exposure time provided
to the camera.
Direction determined by value of
SensorScanDirection
Direction control determined by value on CLHS GPIO
bit 2, Frame grabber register #80524
When ScanDirectionSource set to Internal,
determines the direction of the scan
Selects the number of rows that will be used
Adjusts the sensor characteristics to optimize for
noise performance where the 4 rows would be
selected first with the maximum available light. If
there is insufficient response, add more rows.
Increase the maximum allowable gain.
Sets the gain as per the gain selector setting
Device
Version
& View
1.00
Beginner
SNFC
1.00
Beginner
1.00
Beginner
1.00
Beginner
1.00
Beginner
1.00
Beginner
1.00
Beginner
1.00
Beginner
1.00
Beginner
1.00
Beginner
1.00
Beginner
1.00
Guru
1.00
Beginner
• 43