Table of Contents
Advertisement
Acquisition Stop
AquisitionStop
Acquisition Status
AquisitionStatus
File Access Control Category
The File Access control in CamExpert allows the user to quickly upload and download of various
data files to the connected Piranha XL camera. The supported data files for the Piranha XL camera
include firmware updates and Flat Field coefficients.
Note that the communication performance when reading and writing large files can be improved by
stopping image acquisition during the transfer.
File Access Control Feature Descriptions
Display Name
File Selector
All Firmware
Microcode
XML
User Set
User FlatField
coefficients
User FPN
52 •
Stops the acquisition of image data at the end of the next
frame(s) sequence (WO)
Indicates whether the camera has been commanded to stop
or to send image data.
Figure 19: File Access Control Panel
Feature
Description
FileSelector
Selects the file to access. The file types which are accessible
are device-dependent.
Upload micro code, FPGA code &XML as a single file to the
camera which will execute on the next camera reboot cycle.
Upload micro to the camera which will execute on the next
camera reboot cycle.
Upload XML to the camera which will execute on the next
camera reboot cycle
Use UserSetSelector to specify which user set to access.
Use UserSetSelector to specify which user flatfield to access.
Use UserSetSelector to specify which user FPN to access.
1.00
Beginner
DFNC
1.00
Beginner
DFNC
View
1.00
Beginner
DFNC
The Piranha XL Camera
Advertisement
Table of Contents
