HAKO Scrubmaster B310 R CL/TB 1020 Instruction Manual page 37

Operation
Steering wheel
(Fig. 18/1)
• The scrubber drier is steered by the
steering wheel.
Left-hand operating panel
(Fig. 18/2)
• This operating panel contains all the
buttons for the electronically con-
trolled standard cleaning programs.
• Individual functions can be added or
removed from the cleaning process,
as necessary.
• All the buttons are provided with
clearly descriptive labels.
• The green control lamps in the oper-
ating buttons serve as function indi-
cators.
• The significance and functioning
method of the individual buttons on
this operating panel is described in
Section 3.2.2.
Safety catch
(Fig. 18/3)
• The safety catch serves to release
the parking brake when applied.
• Operating sequence to release
brake:
- Tread on the pedal slightly.
- Press the catch down.
- Release the pedal.
Parking brake
(Fig. 18/4)
• The pedal to the left of the steering
column serves to apply the parking
brake to the rear wheels.
• When the parking brake is applied,
the corresponding control lamp on
the operating panel (Fig. 19/4) lights
up red.
• If the driving direction switch is actu-
ated while the parking brake is ap-
plied, a pulsating "beep" is issued.
Before getting out of the vehi-
cle apply the parking brake, set
the driving direction switch
(Fig. 18/5) to its neutral posi-
tion and switch the key switch
to off.
Drive direction switch 
(forwards/reverse)
(Fig. 18/5)
• It serves to select the driving direc-
tion:
- Forward: control switch forward
- Reverse: control switch back
- Stop: control switch in center (neu-
tral position)
• To change the driving direction, stop
the vehicle by applying the service
brake, select the new direction and
accelerate again.
37