Maintenance and Service
Changing the belt for the cylindrical
brush
The cylindrical brush is driven by a belt
on the left-hand side.
1
2
Fig. 41
The cover (Fig. 41/1) of the belt is fixed
by two screws (Fig. 41/2).
1. Remove the screws (Fig. 41/2).
Remove the belt cover (Fig. 41/1).
108
1
2
Fig. 42
2. Remove the belt (Fig. 42/1) from the
pulleys (Fig. 42/2+3).
3. Place a new belt in position.
4. Assemble the belt cover (Fig. 41/1)
and fix with the screws (Fig. 41/2).
The belt tension is set by means of a
spring mounted tension pulley
(Fig. 42/3).
3