Advertisement
Hako Scrubmaster B75R TB550
1
1. Disconnect mains plug of the charger and put it in front of the seat 1.
2. Fill the clear water tank from opening 2. Control the filling level by the
filling level indication 3.
3. Switch the machine on by the key switch 4. Actuate drive direction from
switch
5.
4. Press green button
turbine switches on.
5. Press pedal
10
to adjust the water ( if necessary )
NOTE! Make sure that pad / brush is installed!!!
Qualified persons only are authorised to operate the machine!
The machine is not designed for coarse material! Floor area sweeping before!
Use only cleaning agents suitable for automatic machines (low-foaming)!
Please pay attention to the informations in the instruction manual!
OPERATION
6
to lower brush head
9
machine moves and brush head drive switches on. Use lever
2
3
10
8
7
7
and squeegee 8, suction
4
5
6
9
Advertisement
Table of Contents
Related Manuals for HAKO Scrubmaster B75R TB550
Summary of Contents for HAKO Scrubmaster B75R TB550
- Page 1 Hako Scrubmaster B75R TB550 OPERATION 1. Disconnect mains plug of the charger and put it in front of the seat 1. 2. Fill the clear water tank from opening 2. Control the filling level by the filling level indication 3.
- Page 2 Hako Scrubmaster B75R TB550 MAINTENANCE AND CARE: Weekly maintenance: Daily maintenance: Check and clean brush head / brush head Empty clear water tank by opening the sealing strip 10. fresh water filter covering 1. ( lever which Clean the machine from outside.
Need help?
Do you have a question about the Scrubmaster B75R TB550 and is the answer not in the manual?
Questions and answers