Yamaha Motif XF6 Owner's Manual page 67

LCD Indication
Now saving...
Now scanning autoload file.
Now transmitting MIDI bulk data...
Overwrite.
Are you sure?
Password is invalid.
Password is too short.
Password is unspecified.
Phrase limit exceeded.
Please keep power on.
Please select User Voice.
Please stop sequencer.
Sample frequency is too low.
Sample is too long.
Sample is too short.
Sample memory full.
Sample Voice full
Scene stored.
Sequence memory full.
The edited sequence data will be
discarded.
Are you sure?
The received MIDI bulk data's type is
not compatible with the current mode/
voice type.
This Performance uses User Voices.
Too many Samples.
Unrecognized Flash Memory Module.
Please format it.
USB connection terminated.
Press any button.
Utility/Sequencer Setup settings
stored.
Waveform full
When the checkbox is "on," all user
data is initialized the next time the
power is turned on.
Indicates that a file is being saved.
Scanning for the files specified for Auto Load.
Indicates this synthesizer is transmitting MIDI bulk data.
A save operation will overwrite data on the external storage device as destination, and this message confirms
whether it is OK to continue or not. Press [INC/YES] or [DEC/NO] as required.
The password you input does not match the already registered password,
The password you input to "New Password" is too short. Input at least five characters as a password.
This message appears when setting the File Server Switch parameter to "ON" though a password has not been
registered.
The maximum number of Phrases (256) has been exceeded when recording, executing a Pattern Job, or
editing.
The data is being written to Flash ROM. Never attempt to turn off the power while data is being written to Flash
ROM. Turning the power off while this message is shown results in loss of all user data and may cause the
system to freeze (due to corruption of data in the Flash ROM). This may also result in the MOTIF XF being
unable to properly start up the next time the power is turned on.
This message appears when entering the File mode from the Performance mode and selecting a Part to which
a preset Voice is assigned in the Waveform Load operation. Assign a User Voice to the destination Part then
execute the Load operation.
The operation you have attempted to execute cannot be done during Song/Pattern playback.
The sampling frequency is too low and the Frequency Convert Job cannot be executed.
The Sample size is too large and the Time Stretch Job cannot be executed.
The Sample length is too short and the Frequency Convert Job cannot be executed.
The Sample memory is full and further Sampling operations, Jobs, or load operations cannot be executed.
The maximum overall number of Sample Voices has been exceeded when executing the Sampling related
operations including Jobs and Load.
The Song Scene has been stored to one of the [SF1] – [SF5] buttons.
The internal memory for Sequence data is full, preventing any further operation (such as recording, editing, Job
execution, MIDI reception/transmission, or loading from the external storage device). Try again after erasing
unwanted Song, Pattern, or User Phrase data.
Indicates that the operation will delete the currently edited Song or Pattern.
This message appears when MIDI bulk data is received in a different mode other than the currently selected
mode. The bulk data is received in the same mode as the transmitting mode. This message also appears when
the Voice type (Normal Voice/Drum Voice) of the destination Mixing Parts is different from the bulk-dump-
transferred Voice type. The destination Parts assigned to the same Voice type as the bulk-dump-transferred
Voice type are selected.
The Performance you have loaded includes User Voice data. Check whether the Voice you saved exists at the
appropriate User voice bank.
The maximum overall number of samples (8192) has been exceeded.
An unformatted Flash Memory Expansion Module has been recognized. Execute the Format operation.
A break in the connection with the USB storage device has occurred because of an abnormal electric current.
Disconnect the USB storage device from the USB TO DEVICE connector, then press any of the panel buttons.
The settings in the Utility mode have been stored.
The maximum overall number of Waveforms has been exceeded when executing the Sampling related
operations including Jobs and Load.
(Self-explanatory)
Description
Display Messages
67
MOTIF XF Owner's Manual