Adjusting The Volume And The Brightness Of The Display; Listening To The Demo Song - Yamaha Motif XF6 Owner's Manual

Adjusting the Volume and the
Brightness of the Display
Adjust the volume levels of the MOTIF XF and the connected
amplifier/speaker system. If the display is not easily visible,
use the Contrast control to adjust for optimum visibility.
Adjust the volume with the
Adjust the display contrast
MASTER VOLUME slider.
with the Contrast control.
Max.
Light
Min.
MOTIF XF
CAUTION
Do not listen with the headphones at high volume for long periods of
time. Doing so may cause hearing loss.
NOTE
Keep in mind that the LCD display is not a touch screen type. Do
not touch and press the display directly or forcefully.

Listening to the Demo Song

Try listening to the preset Demo Songs, enjoy the high-
quality sound, and get a taste for how you can use the
MOTIF XF to create your own music.
Playing the Demo Song
1
Press the [SONG] button to enter the Song Play
mode.
The Track View display of the Song Play mode appears.
2
Press the SEQ TRANSPORT [F] (Play) button to
start the Demo Song.
The Song currently shown on the display starts.
Stop button
NOTE
To adjust the volume level of the Demo Songs, use the
MASTER VOLUME slider.
3
Press the SEQ TRANSPORT [J] (Stop) button to
stop the Demo Song.
Dark
Play button
Selecting another Song
1
Make sure that the cursor is located on the Song
Number in the Track View display.
The highlighted frame within the display is called the
"cursor." You can move the cursor up, down, left and right by
using the Cursor buttons. If the cursor is located on another
parameter, move the cursor to the Song Number.
Song name
Song number
NOTE
Keep in mind that the example displays shown in this
manual are for instruction purposes only, and may appear
somewhat different from those on your instrument.
2
Press the [INC/YES] and [DEC/NO] buttons or
rotate the data dial to change the Demo Song
number.
Decreases
number
Decreases
number
NOTE
You can change the value of various parameters as well as the
Song number by using the [DEC/NO]/[INC/YES] button or data
dial after moving the cursor to the desired location. This basic
operation is used for all of the selection and adjustment
operations on the instrument.
Setting Up
Increases
number
Increases
number
17
MOTIF XF Owner's Manual