Table of Contents
Advertisement
11
Press the [F6] Stop button to stop Sampling.
• If you set Confirm to on in step 8 above, the Sampling
Finished display appears. Press the [SF1] Audition
button to hear the sampled sound. If you are satisfied
with the results, press the [ENTER] button to store the
sampled sound as a "Sample" and return to the Setup
display. If you are not satisfied with the results and you
wish to try again, press the [EXIT] button to return to the
Standby display and try Sampling from step 5 again.
• If you set Confirm to off in step 8 above, the sampled
sound will be stored as a "Sample" automatically.
12
Save the Waveform.
If the optional Flash Memory Expansion Memory (FL512M/
FL1024M) is installed to the MOTIF XF, use the Copy Job
(page 53) to save the Waveform. If not, save the
Waveform to the USB storage device (page 64).
NOTICE
The recorded (edited) Sample data will be lost when turning the
power off. Before turning off the power, you should always copy the
Sample data to the optional Flash Memory Expansion Memory
(page 53), or save the Sample data to a USB storage device (page 64).
Sampling Edit procedure
1
Press the [INTEGRATED SAMPLING] button to
enter the Sampling mode. (The indicator lights.)
The Sampling Main display appears.
2
Select a Waveform and Key Bank to which the
Sample to be edited is assigned.
3
Press the [EDIT] button to enter the Sampling Edit
mode.
4
Press the [F1] Trim button, then set the desired
parameter.
From this display, you can set various parameters.
Here, delete the unnecessary parts of the Sample. Setting
the Start Point and End Point determines the necessary part
of the Sample. You can confirm the setting result by pressing
the [SF1] Audition button. If you are satisfied with the result,
press the [ENTER] button to actually extract the
unnecessary parts of the Sample data.
Next, set the Key Range within which you can play the
Sample sound. Set the Key Range to "C2 – B3," for example.
You can confirm the setting result by actually playing the
keyboard. The Sample sounds at a pitch suitable for each
note.
5
Save the Waveform.
If the optional Flash Memory Expansion Memory is installed
to the MOTIF XF, use the Copy Job (page 53) to save the
Waveform. If not, save the Waveform to a USB storage
device (page 64).
Using the Sampling feature
49
MOTIF XF Owner's Manual
Advertisement
Table of Contents
