Yamaha Motif XF6 Owner's Manual page 11

G I
A
C B
K
E F
D
C4
9 [MULTI PART CONTROL] button
Pressing this button changes the functions assigned to the
eight knobs in the Performance /Song/Pattern mode. The
lamp next to the currently active parameters will light. In the
Performance mode, the four knobs at the left end
correspond to Parts 1 – 4. In the Song/Pattern mode, all
knobs correspond to Parts 1 – 8 or 9 –16 (depending on the
currently selected Part)
) Control Sliders (pages 25, 28)
These sliders control the volume of the sound in different
ways depending on the mode selected:
Voice mode: volume of the eight Elements
Performance mode: volume of the four Parts
Song/Pattern modes: volume of the eight Parts, including the
current Part
Master mode: volume or specified Control Change number
of the eight Zones
NOTE
If all of the Control Sliders are set to the minimum, you may not
hear any sound from the instrument, even when playing the
keyboard or a Song/Pattern. If this is the case, raise all the
sliders to a suitable level.
NOTE
The MASTER VOLUME slider adjusts the audio output level from
this instrument. On the other hand, the Control Sliders adjust the
volume for each Element of the Voice or each Part of the
Performance/Song/Pattern as a parameter. Accordingly, the
values set via the Control Sliders can be stored as Voice,
Performance, Song, or Pattern data.
H
L
M
N O
P Q
J
C5 C6
NOTE
For more information about 1 – 5, refer to "Controller Block"
in the Reference Manual.
C7
! [REMOTE ON/OFF] button (page 61)
The Remote mode lets you control sequencer software on
your computer from the panel controls of the instrument. Turn
the [ON/OFF] button on to enter the Remote mode.
@ [ARPEGGIO ON/OFF] button (page 23)
Press this button to enable or disable playback of the
Arpeggio for each Voice, Performance, Song, or Pattern. If
the Arpeggio Switch of the selected Part is set to off in the
Performance/Song/Pattern mode, however, pressing this
button has no effect.
# EFFECT buttons
The extensive effect block of the instrument provides
Insertion effects (eight sets, with two effect units per set),
System Effects (Reverb and Chorus), and Master Effects.
The effects can be applied to the keyboard-played Voices
and to Song/Pattern playback.
When the lamp of the [INSERTION] or [SYSTEM] button is
turned on, the corresponding Effect is on.
Controls and Functions
11
MOTIF XF Owner's Manual