Figure 5-1 Configuring An Ap; Figure 5-2 Checking The Configuration Of The Ap - Huawei UAP2105 User Manual

UAP2105
User Guide

Figure 5-1 Configuring an AP

l

Figure 5-2 Checking the configuration of the AP

Issue 03 (2009-08-20)
2. Configure the AP. On the WebUI, choose Transfer Basic > NETMODE . Click
Mod, set Net Mode to PPPOELINK, and then type the user name and password for
a PPPoE dial-up connection, as shown in
NOTE
After the networking mode of the AP is changed, the AP is automatically restarted. The existing
configurations are not modified.
In PPPoE route mode
1. Configure the ADSL modem.
NOTE
To set WAN Configuration, NAT, and DNS of the ADSL modem in PPPoE route mode, set
the application type of the ADSL modem to PPPoE, NAT to NAPT, DNS to Allow, and DHCP
to DHCP Server. The setting method varies according to the type of the ADSL modem. For
details, see the document delivered with the ADSL modem.
2. Check the configuration of the AP. On the WebUI, choose Transfer Basic >
NETMODE to check the configuration of the AP, as shown in
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Configuring the UAP2105
Figure 5-1.
Figure 5-2.
5-3