TP-Link Archer C7 User Manual page 29

Wireless Radio - Indicates whether the wireless radio feature of the Router is enabled

or disabled.
Wireless Network Name - Enter a string of up to 32 characters. The same Name

(SSID) must be assigned to all wireless devices in your network. The default SSID is set
to be TP-LINK_xxxx (xxxx indicates the last unique four characters of each Router's
MAC address), which can ensure your wireless network security. But it is recommended
strongly that you change your networks name (SSID) to a different value. This value is
case-sensitive. For example, MYSSID is NOT the same as MySsid.
Region - Select your region from the drop-down list. This field specifies the region

where the wireless function of the router can be used. It may be illegal to use the
wireless function of the router in a region other than one of those specified in this field. If
your country or region is not listed, please contact your local government agency for
assistance.

Note:
Per FCC regulations, all Wi-Fi products marketed in the U.S. must be fixed to the U.S.
region only.
Archer C7 AC1750 Wireless Dual Band Gigabit Router
Figure 3-13 Quick Setup – Wireless
- 17 -