TP-Link Archer C7 User Manual page 121

Get IPv6 prefix delegation - Get a prefix delegation IPv6 address by DHCPv6 from the
•
ISP, and the clients in LAN create IPv6 address with the delegation.
Use IP address specified by ISP - Input a static IPv6 address from the ISP
•
Click the Connect button to connect immediately.
Click the Disconnect button to disconnect immediately.
IPv6 Address Assign Type - There are two types of assignation for IPv6 address: SLAAC

(Stateless address auto-configuration) and DHCPv6 (Dynamic Host Configuration Protocol
for IPv6) Server.
SLAAC
IPv6 Address Prefix -The Prefix of IPv6 Address
•
DHCPv6 Server
Release Time - the length of time a network user will be allowed to keep connecting to the
•
router with the current DHCPv6 Address. Enter the amount of time (in seconds) that the
DHCPv6 address will be leased. The time range is 1~691200 seconds. The default value
is 86400 seconds.
IPv6 Address - Displays the LAN IPv6 Address.
•
4) Tunnel 6to4
 Address/Subnet Mask/Default Gateway - the IPv4 address/ subnet mask/ default gateway
assigned, in dotted-decimal notation.
 MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet networks
is 1480 Bytes. For some ISPs, you may need to modify the MTU. But this is rarely required,
and should not be done unless you are sure it is necessary for your ISP connection.
Archer C7 AC1750 Wireless Dual Band Gigabit Router
Figure 4-111 Tunnel 6to4
- 109 -