TP-Link Archer C7 User Manual page 67

PSK Password - You can enter ASCII characters between 8 and 63 characters or 8 to
•
64 Hexadecimal characters. The default password is the same with the default PIN code,
which is labeled on the bottom of the router or can be found in Figure 4-33.
Group Key Update Period - Specify the group key update interval in seconds. The
•
value should be 30 or above. Enter 0 to disable the update.
WPA /WPA2- Enterprise - It's based on Radius Server.

Version - you can choose the version of the WPA security on the drop-down list. The
•
default setting is Automatic, which can select WPA (Wi-Fi Protected Access) or WPA2
(WPA version 2) automatically based on the wireless station's capability and request.
Encryption - You can select either Automatic, or TKIP or AES.
•

Note:
If you check the WPA/WPA2-Enterprise
find a notice in red as shown in Figure
Radius Server IP - Enter the IP address of the Radius server.
•
Radius Port - Enter the port number of the Radius server.
•
Radius Password - Enter the password for the Radius server.
•
Group Key Update Period - Specify the group key update interval in seconds. The
•
value should be 30 or above. Enter 0 to disable the update.
WEP - It is based on the IEEE 802.11 standard. If you check this radio button, you will find a

notice in red as show in Figure 4-40.
Archer C7 AC1750 Wireless Dual Band Gigabit Router
Figure 4-38 WPA/WPA2 – Personal
radio button and choose TKIP encryption, you will
4-39.
Figure 4-39 WPA/WPA2 - Enterprise
- 55 -