TP-Link Archer C7 User Manual page 97

There are two methods to add a new rule.
Method One:
Click Setup Wizard button and the next screen will appear as shown in Figure 4-75.
1.
Host Description - In this field, create a unique description for the host (e.g. Host_1).

Mode - Here are two options, IP Address and MAC Address. You can select either of

them from the drop-down list.
If the IP Address is selected, you can see the following item:
LAN IP Address - Enter the IP address or address range of the host in
•
dotted-decimal format (e.g. 192.168.0.23).
If the MAC Address is selected, you can see the following item:
MAC Address - Enter the MAC address of the host in XX-XX-XX-XX-XX-XX format
•
(e.g. 00-11-22-33-44-AA).
2. Click Next when finishing creating the host entry, and the next screen will appear as shown in
Figure 4-76.
Figure 4-76 Quick Setup – Create an Access Target Entry
Archer C7
Figure 4-75 Quick Setup – Create a Host Entry
AC1750 Wireless Dual Band Gigabit Router
- 85 -