Configure Winrm Https/Ssl On The Server - Qlogic 8400 Series User Manual

7–Installing Management Applications
Detailed Procedures
15. Right-click on the certificate, and then select Properties to open the
MGMTAPP-LAB3 Properties dialog box
16. Ensure that only Server Authentication is enabled, as shown in the figure.
17. Open Trusted Root Certification Authorities and then open Certificates.
18. Follow the instructions from
NOTE
See
for instructions on importing the self-signed certificate on a client.

Configure WinRM HTTPS/SSL on the Server

1. Create WinRM Listener, as follows:
a.
b.
c.
Figure 7-1. MGMTAPP-LAB3 Dialog Box
"Perform HTTPS Configuration (if you plan to use HTTPS)" on page 72
Click Start (or press the Windows logo key) and select Run.
Enter MMC and click OK.
Select the self-signed certificate from the Personal store.
(Figure
Step 11 to Step 17
68
7-1).
83840-546-00 D