Fcoe Boot<Variable>—Specify Target Wwpn And Boot Lun - Qlogic 8400 Series User Manual

11–Fibre Channel Over Ethernet
FCoE Boot from SAN
6. Enable the Connect field. Enter the target WWPN and Boot LUN
information for the target to be used for boot
Figure 11-5. FCoE Boot<Variable>—Specify Target WWPN and Boot LUN
7. Press ESC until prompted to exit and save changes. To exit CCM, restart the
system, and apply changes, press CTRL+ALT+Del.
8. Proceed to OS installation once storage access has been provisioned in the
SAN.
Figure 11-6. FCoE Boot Target Information
(Figure
220
11-5).
83840-546-00 D