2. Getting Started
2.1
Baby Unit Power Supply
Micro USB plug
1. Connect the power adapter to a mains power socket and insert the plug
into the micro USB socket on the back of the Baby Unit (Camera).
NOTE
Only use the enclosed Power Adapter (5V DC / 1000mA) with the Micro USB
plug.
2. Slide the ON/OFF switch to the ON position. The power indicator LED will
light up in blue.
3. To switch off the Baby Unit, slide the ON/OFF switch to the OFF position.
2.2
Parent Unit Battery Installation
The rechargeable battery pack supplied should be installed so that the Parent
Unit can be moved without losing the link and picture with the Baby Unit(s).
Charge the battery in the Parent Unit before using it for the first time or when the
Parent Unit indicates that battery is low.
Black
10
Red
Getting Started