Getting Started; Baby Unit Power Supply - Motorola VM483 User Manual

2. Getting Started

2.1

Baby Unit Power Supply

1. Insert the DC plug of the power adapter into the DC socket on the back of
the Baby Unit.
2. Connect the other end of the power adapter to a suitable electrical outlet.
3. Slide the ON/OFF switch to the ON position. The power LED lights up in
green, or flashes if searching for the Parent Unit.
4. Slide the ON/OFF switch to the OFF position to switch off the Baby Unit.
NOTE
Only use the supplied power adapter ( 5 V DC / 10 00mA).
10
ON/OFF
switch
Getting Started