2. Getting Started
2.1
Charging the Smart Nursery Camera
Slide to the ON position to
turn on the Camera
LED charging
indicator
1. Connect the Micro USB plug of the power adapter to the Smart Nursery
Camera and the other end to a suitable electrical outlet.
The LED charging indicator lights up red and the LED status indicator lights
up blue initially, then flashes red.
NOTE
Only use the enclosed power adapter (5V DC / 1500mA) with the Micro USB
plug.
It takes about 6 hours to fully charge the built-in rechargeable battery.
A fully-charged built-in rechargeable battery supports up to 3 hours of video
streaming.
2.2
Powering the Camera On/Off
1. Slide the ON/OFF switch to the ON position.
The LED indicator located at the front of the Camera will light up in blue.
2.
Slide the ON/OFF switch to the OFF position to turn off the Camera.
2.3
LED status indicators
Startup state
Ready for connection state
Cloud connected state
10
• LED is red and flashing slowly
• LED is blue and flashing slowly
• LED is blue and always on
LED status indicator
Insert Micro USB plug
Getting Started