Table of Contents
Advertisement
2. Getting Started
2.1
Baby Unit Power Supply
Switch to turn ON
the camera
1. Connect the small plug of the power adapter to the Baby Unit (camera) and
the other end to a suitable electrical outlet.
NOTE
Only use the enclosed power adapter (5V DC / 1500mA).
2. Slide the ON/OFF switch to the ON position. The power LED will light up
in blue.
3. Slide the ON/OFF switch to the OFF position to turn the Baby Unit off.
2.2
Parent Unit Power Supply
IMPORTANT
The Parent Unit is assembled with a built-in rechargeable battery pack (Lithium-
ion battery 1880mAh), please charge it for 16 hours before use.
1. Connect the micro USB plug of the power adapter to the Parent Unit and
the other end to a suitable electrical outlet. Only use the enclosed power
adapter (5V DC / 1500mA) with the micro USB plug.
Getting Started
ON
OFF
Power adapter plug
11
Advertisement
Table of Contents
