Table of Contents
Advertisement
1.
Getting started
Location
Important
Do not place your VM40XL TOUCH in the bathroom or other humid areas.
Place your units within reach of the AC power outlet and wall socket. The
socket-outlet should be installed near the equipment and should be easily
accessible.
Setting up
Important
The baby (camera) unit must be plugged into the wall socket at all times. Use
only the AC power adapter supplied with the product.
Connecting the baby (camera) unit
You will need to carry out this process for the single or multi baby (camera)
units.
1.
Plug the DC plug of the power adapter into the power socket on the rear of
the baby (camera) unit and plug the other end of the AC adapter into the
wall socket.
2. Switch on the AC power.
3. The baby unit turns on and the power indicator lights up in blue and flashes
in red after 30 seconds if the parent unit has not been powered up.
Getting started
7
Advertisement
Table of Contents
