Creating A Raid 0 Set (Stripe) - Asus 1U Rackmount Barebone Server RS120-E3 (PA4) User Manual

6.3.1 6.3.1 6.3.1

Creating a RAID 0 set (Stripe)

Creating a RAID 0 set (Stripe) Creating a RAID 0 set (Stripe)
6.3.1 6.3.1 Creating a RAID 0 set (Stripe) Creating a RAID 0 set (Stripe)
To create a RAID 0 set:
1. From the utility main menu, select 1 . C r e a t e R A I D V o l u m e
press <Enter>. This screen appears.
Intel(R) Matrix Storage Manager Option ROM v5.0.0.1032 ICH7R wRAID5
Copyright(C) 2003-05 Intel Corporation. All Rights Reserved.
Enter a string between 1 and 16 characters in length that can be used
to uniquely identify the RAID volume. This name is case sensitive and
2. Enter a name for the RAID 0 set, then press <Enter>.
3. Highlight R A I D L e v e l
|R A I D 0 ( S t r i p e ) R A I D 0 ( S t r i p e ) R A I D 0 ( S t r i p e ), then press <Enter>. R A I D 0 ( S t r i p e ) R A I D 0 ( S t r i p e )
4. Highlight the D i s k s
drives you want to include in the RAID set. The S E L E C T D I S K S
appears.
5. Use the up/down arrow key to highlight a drive, then press <Space> to
select. A small triangle marks the selected drive. Press <Enter> after
completing your selection.
6 - 3 2 6 - 3 2 6 - 3 2
6 - 3 2 6 - 3 2
[
Name:
RAID Level:
Disks:
Strip Size:
Capacity:
[ DISK/VOLUME INFORMATION
cannot contain special characters.
[↑ ↑ ↑ ↑ ↑ ↓ ↓ ↓ ↓ ↓ ]-Select
[ESC]-Exit
R A I D L e v e l R A I D L e v e l R A I D L e v e l R A I D L e v e l, press the up/down arrow key to select
D i s k s D i s k s D i s k s D i s k s item, then press <Enter> to select the hard disk
Port Drive Model
0 XXXXXX XXXXXX
1 XXXXXX XXXXXX
2 XXXXXX XXXXXX
3 XXXXXX XXXXXX
Select 2 to 4 disks to use in creating the volume.
[↑ ↑ ↑ ↑ ↑ ↓ ↓ ↓ ↓ ↓ ]-Previous/Next
1 . C r e a t e R A I D V o l u m e 1 . C r e a t e R A I D V o l u m e, then 1 . C r e a t e R A I D V o l u m e
1 . C r e a t e R A I D V o l u m e
CREATE ARRAY MENU
Volume0
RAID0(Stripe)
Select Disks
128KB
0.0 GB
Create Volume
[ SELECT DISKS ]
Serial # Size
XX.XGB
XX.XGB
XX.XGB
XX.XGB
[SPACE]-Selects [ENTER]-Selection Complete
C h a p t e r 6 : R A I D c o n f i g u r a t i o n C h a p t e r 6 : R A I D c o n f i g u r a t i o n C h a p t e r 6 : R A I D c o n f i g u r a t i o n
C h a p t e r 6 : R A I D c o n f i g u r a t i o n C h a p t e r 6 : R A I D c o n f i g u r a t i o n
]
]
[ENTER]-Select Menu
S E L E C T D I S K S S E L E C T D I S K S
S E L E C T D I S K S screen S E L E C T D I S K S
Status
Non-RAID Disk
Non-RAID Disk
Non-RAID Disk
Non-RAID Disk