Creating A Raid 0 Set (Stripe) - Asus TS300-E4 User Manual

6.3.1

Creating a RAID 0 set (Stripe)

To create a RAID 0 set:
From the utility main menu, select 1. Create RAID Volume, then press
1.
<Enter>. This screen appears.
to uniquely identify the RAID volume. This name is case sensitive and
2. Enter a name for the RAID 0 set, then press <Enter>.
Highlight RAID Level, press the up/down arrow key to select
3.
RAID 0 (Stripe), then press <Enter>.
Highlight the Disks item, then press <Enter> to select the hard disk drives
4.
you want to include in the RAID set. The SELECT DISKS screen appears.
5. Use the up/down arrow key to highlight a drive, then press <Space> to
select. A small triangle marks the selected drive. Press <Enter> after
completing your selection.
6-32
Intel(R) Matrix Storage Manager Option ROM v5.0.0.1032 ICH7R wRAID5
Copyright(C) 2003-05 Intel Corporation. All Rights Reserved.
Name:
RAID Level:
Disks:
Strip Size:
Capacity:
[ DISK/VOLUME INFORMATION
Enter a string between 1 and 16 characters in length that can be used
cannot contain special characters.
[↑↓]-Select
Port Drive Model
0 XXXXXX XXXXXX
1 XXXXXX XXXXXX
2 XXXXXX XXXXXX
3 XXXXXX XXXXXX
Select 2 to 4 disks to use in creating the volume.
[↑↓]-Previous/Next [SPACE]-Selects [ENTER]-Selection Complete
[ CREATE ARRAY MENU ]
Volume0
RAID0(Stripe)
Select Disks
128KB
0.0 GB
Create Volume
[ESC]-Exit [ENTER]-Select Menu
[ SELECT DISKS ]
Serial # Size
XX.XGB
XX.XGB
XX.XGB
XX.XGB
]
Status
N o n - R A I D D i s k
N o n - R A I D D i s k
Non-RAID Disk
N o n - R A I D D i s k
Chapter 6: RAID configuration