Initializing The Logical Drives - Asus 1U Rackmount Barebone Server RS120-E3 (PA4) User Manual

6.2.4 6.2.4 6.2.4

Initializing the logical drives

Initializing the logical drives Initializing the logical drives
6.2.4 6.2.4 Initializing the logical drives Initializing the logical drives
After creating the RAID set(s), you must initialize the logical drives. You may
initialize the logical drives of a RAID set(s) using the I n i t i a l i z e
command on the Management Menu.
Using the Initialize command Using the Initialize command
Using the Initialize command Using the Initialize command Using the Initialize command
To initialize the logical drive using the I n i t i a l i z e
1. From the Management Menu, highlight I n i t i a l i z e
2. The screen displays the available RAID set(s) and prompts you to select
the logical drive to initialize. Use the arrow keys to select the logical
drive from the L o g i c a l D r i v e
6 - 1 8 6 - 1 8 6 - 1 8
6 - 1 8 6 - 1 8
L o g i c a l D r i v e selection, then press <Enter>. L o g i c a l D r i v e L o g i c a l D r i v e
L o g i c a l D r i v e
I n i t i a l i z e I n i t i a l i z e or O b j e c t s I n i t i a l i z e
I n i t i a l i z e
I n i t i a l i z e command: I n i t i a l i z e I n i t i a l i z e
I n i t i a l i z e
I n i t i a l i z e I n i t i a l i z e
I n i t i a l i z e, then press <Enter>. I n i t i a l i z e
C h a p t e r 6 : R A I D c o n f i g u r a t i o n C h a p t e r 6 : R A I D c o n f i g u r a t i o n C h a p t e r 6 : R A I D c o n f i g u r a t i o n
C h a p t e r 6 : R A I D c o n f i g u r a t i o n C h a p t e r 6 : R A I D c o n f i g u r a t i o n
O b j e c t s O b j e c t s O b j e c t s
O b j e c t s