Adding Or Viewing A Raid Configuration - Asus 1U Rackmount Barebone Server RS120-E3 (PA4) User Manual

6.2.3 6.2.3 6.2.3

Adding or viewing a RAID configuration

Adding or viewing a RAID configuration Adding or viewing a RAID configuration
6.2.3 6.2.3 Adding or viewing a RAID configuration Adding or viewing a RAID configuration
You can add a new RAID configuration or view an existing configuration using
the V i e w / A d d C o n f i g u r a t i o n V i e w / A d d C o n f i g u r a t i o n V i e w / A d d C o n f i g u r a t i o n command. V i e w / A d d C o n f i g u r a t i o n
V i e w / A d d C o n f i g u r a t i o n
Adding a new RAID configuration Adding a new RAID configuration Adding a new RAID configuration Adding a new RAID configuration Adding a new RAID configuration
To add a new RAID configuration:
1. From the Management Menu, highlight C o n f i g u r e
2. Use the arrow keys to select V i e w / A d d C o n f i g u r a t i o n
<Enter>.
3. The ARRAY SELECTION MENU ARRAY SELECTION MENU ARRAY SELECTION MENU displays the available drives connected ARRAY SELECTION MENU
ARRAY SELECTION MENU
to the SATA ports. Select the drive(s) you want to include in the RAID
set, then press <SpaceBar>. When selected, the drive indicator changes
R E A D Y R E A D Y
from R E A D Y R E A D Y to ONLIN A[X]-[Y] R E A D Y
the drive number.
The information of the selected hard disk drive displays at the bottom of
the screen.
A S U S R S 1 2 0 - E 3 / P A 4 A S U S R S 1 2 0 - E 3 / P A 4 A S U S R S 1 2 0 - E 3 / P A 4
A S U S R S 1 2 0 - E 3 / P A 4 A S U S R S 1 2 0 - E 3 / P A 4
V i e w / A d d C o n f i g u r a t i o n V i e w / A d d C o n f i g u r a t i o n, then press V i e w / A d d C o n f i g u r a t i o n
V i e w / A d d C o n f i g u r a t i o n
ONLIN A[X]-[Y] ONLIN A[X]-[Y]
ONLIN A[X]-[Y], where X is the array number, and Y is ONLIN A[X]-[Y]
C o n f i g u r e C o n f i g u r e
C o n f i g u r e, then press <Enter>. C o n f i g u r e
6 - 1 5 6 - 1 5 6 - 1 5
6 - 1 5 6 - 1 5