Table of Contents
Advertisement
6.
Select R A I D
R A I D
R A I D
7.
Select the RAID level from the menu, then press <Enter>.
You need at least two identical hard disk drives when creating a RAID 1 set.
8.
When creating a RAID 1 set, select S t r i p e S i z e
D r i v e
D r i v e
D r i v e menu, then press <Enter>.
D r i v e
D r i v e
When creating a RAID 0 set, proceed to step 10.
9.
Key-in the stripe size, then press <Enter>.
For server systems, we recommend that you use a lower array block size.
For multimedia computer systems used mainly for audio and video editing,
we recommend a higher array block size for optimum performance.
6 - 8
6 - 8
6 - 8
6 - 8
6 - 8
R A I D from the L o g i c a l D r i v e
R A I D
L o g i c a l D r i v e menu, then press <Enter>.
L o g i c a l D r i v e
L o g i c a l D r i v e
L o g i c a l D r i v e
S t r i p e S i z e
S t r i p e S i z e from the L o g i c a l
S t r i p e S i z e
S t r i p e S i z e
C h a p t e r 6 : R A I D c o n f i g u r a t i o n
C h a p t e r 6 : R A I D c o n f i g u r a t i o n
C h a p t e r 6 : R A I D c o n f i g u r a t i o n
C h a p t e r 6 : R A I D c o n f i g u r a t i o n
C h a p t e r 6 : R A I D c o n f i g u r a t i o n
L o g i c a l
L o g i c a l
L o g i c a l
L o g i c a l
Advertisement
Table of Contents
